Chemical Composition
Base Element
C (Carbon)
0.15
%  (maximum)  
Cr (Chromium)
12 to 14
%    
Fe (Iron)
83.3 to 86.7
%    (estimate)
Ni (Nickel)
1.25 to 2.5
%    
P (Phosphorus)
0.07
%  (minimum)  
Balance
Other elements
P, S, or Se 0.07 min
Composition Note
Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one.
 
Mechanical Properties
Yield Strength
586
MPa    
Ultimate Tensile Strength
689
MPa    
Elongation
13
% strain    
Brinell Hardness
205
   
 
Other Information
Material Class
Country
Description
Annealed: 75,000 TS; 40,000 YS; 30 El; 60 RA; 155 HB; Cold drawn: 100,000 TS; 85,000 YS; 13 El; 50 RA; 205 HB; For screw machine products, valve trim, pump shafts; Type 416; free-cutting, stainless.
Designation
KRUPP V3MS
Specification Type
Specification Status
Source
Available forms
Similar Alloys
 



No warranty is given for the accuracy of these data
Copyright © 2024 ASM International®