Chemical Composition Base Element Fe (Iron) C (Carbon) 0.1 % Cr (Chromium) 16 % Fe (Iron) 83.9 % (estimate) Balance Fe (Iron) Composition Note Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one. Mechanical Properties Yield Strength 400 MPa Ultimate Tensile Strength 517 MPa Elongation 28 % strain Brinell Hardness 170 Other Information Material Class Ferrous Alloy Country USA Description Annealed: 75,000 TS; 58,000 YS; 28 El; 62 RA; 170 HB; For exterior trim, ornaments, cold rivets, tanks, retorts, nitric acid equipment; ductile, corrosion resistant. Designation BETHADUR NO. 430 Specification Type Manufacturer's Specification Specification Status Obsolete Source Woldman's Engineering Alloys 9th ed. J. Frick Editor, ASM International 2000 Available forms Wrought Similar Alloys Click here to find similar alloys Links Organizations Bethlehem Steel Corp.
No warranty is given for the accuracy of these data Copyright © 2024 ASM International®

Chemical Composition

Base Element

Fe (Iron)

C (Carbon)

0.1

Cr (Chromium)

Fe (Iron)

83.9

% (estimate)

Balance

Fe (Iron)

Composition Note

Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one.

Mechanical Properties

Yield Strength

400

MPa

Ultimate Tensile Strength

517

MPa

Elongation

% strain

Brinell Hardness

170

Other Information

Material Class

Ferrous Alloy

Country

USA

Description

Annealed: 75,000 TS; 58,000 YS; 28 El; 62 RA; 170 HB; For exterior trim, ornaments, cold rivets, tanks, retorts, nitric acid equipment; ductile, corrosion resistant.

Designation

BETHADUR NO. 430

Specification Type

Manufacturer's Specification

Specification Status

Obsolete

Source

Woldman's Engineering Alloys 9th ed. J. Frick Editor, ASM International 2000

Available forms

Wrought

Similar Alloys

Click here to find similar alloys

Links

Organizations

Bethlehem Steel Corp.

UNHANDLED ERROR!