Chemical Composition
Base Element
C (Carbon)
0.03
%    
Cr (Chromium)
10.50 to 12.50
%    
Fe (Iron)
83.4 to 85.4
%    (estimate)
Mn (Manganese)
1.50
%    
N (Nitrogen)
0.030
%    
Ni (Nickel)
1.50
%    
P (Phosphorus)
0.040
%    
S (Sulfur)
0.030
%    
Si (Silicon)
1.00
%    
Balance
Composition Note
Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one.
 
Mechanical Properties
Yield Strength
280
MPa    
Ultimate Tensile Strength
460
MPa    
Elongation
18
% strain    
Brinell Hardness
220
   
 
Other Information
Material Class
Country
USA
Description
For combination of abrasion and corrosion resistance. 11% Cr stainless steel, dual-phase microstructure of martensite plus ferrite limits grain growth in heat-affected zone. Plate, sheet. 460 MPa TS; 280 MPa YS; 18 EL; 220 HB.
Designation
DURACORR
Specification Type
Specification Status
Source
Available forms
Similar Alloys
 
Links
 



No warranty is given for the accuracy of these data
Copyright © 2024 ASM International®