Chemical Composition Base Element Fe (Iron) Al (Aluminum) 0.02 % (minimum) C (Carbon) 0.05 to 0.1 % Fe (Iron) 99.1 to 99.6 % (estimate) Mn (Manganese) 0.3 to 0.6 % P (Phosphorus) 0.04 % (maximum) S (Sulfur) 0.04 % (maximum) Si (Silicon) 0.1 % (maximum) Composition Note Fe is listed as a Base element for this material, but its % value is not listed in the specification. The value shown is a calculated one. Mechanical Properties Ultimate Tensile Strength 470 MPa (maximum) Other Information Material Class Ferrous Alloy Alloy Family Carbon Steel Alloy Group Low-carbon steel and HSLA steel Alloy Sub-Group 1008/ 1009 Country International Standards Body ISO (International) Description Cold-heading/cold-extruding wrought steel wire rods, wire or bars not intended for heat treatment; d=2-100 mm; as-rolled or as-rolled and peeled condition Alternate Name formerly A2Al Designation CC8A Specification Type Standard Specification ISO 4954 Specification Year 1993 Specification Status Active Specification Status Notes active 1993 Source Worldwide Guide to Equivalent Irons and Steels, 5th ed. ASM International 2006 Available forms Wrought Similar Alloys Click here to find similar alloys Links Organizations International Organization for Standardization (ISO)
No warranty is given for the accuracy of these data Copyright © 2024 ASM International®

Chemical Composition

Base Element

Fe (Iron)

Al (Aluminum)

0.02

% (minimum)

C (Carbon)

0.05 to 0.1

Fe (Iron)

99.1 to 99.6

% (estimate)

Mn (Manganese)

0.3 to 0.6

P (Phosphorus)

0.04

% (maximum)

S (Sulfur)

0.04

% (maximum)

Si (Silicon)

0.1

% (maximum)

Composition Note

Fe is listed as a Base element for this material, but its % value is not listed in the specification. The value shown is a calculated one.

Mechanical Properties

Ultimate Tensile Strength

470

MPa (maximum)

Other Information

Material Class

Ferrous Alloy

Alloy Family

Carbon Steel

Alloy Group

Low-carbon steel and HSLA steel

Alloy Sub-Group

1008/ 1009

Country

International

Standards Body

ISO (International)

Description

Cold-heading/cold-extruding wrought steel wire rods, wire or bars not intended for heat treatment; d=2-100 mm; as-rolled or as-rolled and peeled condition