Range attributes Brinell Hardness 395 to 498 C (Carbon) 0.34 % Cr (Chromium) 0.82 % Elongation 37 to 51 % strain Fe (Iron) 96.9 % (estimate) Mn (Manganese) 0.78 % Mo (Molybdenum) 0.4 % Si (Silicon) 0.28 % Ultimate Tensile Strength 1340 to 1840 MPa W (Tungsten) 0.51 % Yield Strength 1280 to 1490 MPa Logical attributes Shaft Yes Discrete attributes ~Checking Status Not verified - Original build Date Last Checked Thursday, October 17, 2013 Available forms Shaft Balance Fe (Iron) Base Element Fe (Iron) Country USA Material Class Ferrous Alloy Source Woldman's Engineering Alloys 9th ed. J. Frick Editor, ASM International 2000 Specification Status Obsolete Specification Type Manufacturer's Specification Short text attributes Composition Note_old Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one. Country* USA Description_old Heat treated: 194,000-267,000 TS; 185,000-216,000 YS; 37-51 El; 9-15 RA; 395-498 HB; For arbors, dies, gears, shafts, spindles; oil or water hardened, non-tempering. Designation TUNGWIN Long text attributes Composition Note Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one. Description Heat treated: 194,000-267,000 TS; 185,000-216,000 YS; 37-51 El; 9-15 RA; 395-498 HB; For arbors, dies, gears, shafts, spindles; oil or water hardened, non-tempering. Hyperlink attributes Similar Alloys Click here to find similar alloys Integer attributes ID 75439 Source ID 232129 Further Information Organizations Baldwin Steel Co.
No warranty is given for the accuracy of these data Copyright © 2024 ASM International®

Range attributes

Brinell Hardness

395 to 498

C (Carbon)

0.34

Cr (Chromium)

0.82

Elongation

37 to 51

% strain

Fe (Iron)

96.9

% (estimate)

Mn (Manganese)

0.78

Mo (Molybdenum)

0.4

Si (Silicon)

0.28

Ultimate Tensile Strength

1340 to 1840

MPa

W (Tungsten)

0.51

Yield Strength

1280 to 1490

MPa

Logical attributes

Shaft

Yes

Discrete attributes

~Checking Status

Not verified - Original build

Available forms

Shaft

Balance

Fe (Iron)

Base Element

Fe (Iron)

Country

USA

Material Class

Ferrous Alloy

Source

Woldman's Engineering Alloys 9th ed. J. Frick Editor, ASM International 2000

Specification Status

Obsolete

Specification Type

Manufacturer's Specification

Short text attributes

Composition Note_old

Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one.

Country*

USA

Description_old

Heat treated: 194,000-267,000 TS; 185,000-216,000 YS; 37-51 El; 9-15 RA; 395-498 HB; For arbors, dies, gears, shafts, spindles; oil or water hardened, non-tempering.

Designation

TUNGWIN

Long text attributes

Composition Note

Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one.

Description

Heat treated: 194,000-267,000 TS; 185,000-216,000 YS; 37-51 El; 9-15 RA; 395-498 HB; For arbors, dies, gears, shafts, spindles; oil or water hardened, non-tempering.

Hyperlink attributes

Similar Alloys

Click here to find similar alloys

Integer attributes

75439

Source ID

232129

Further Information

Organizations

Baldwin Steel Co.

UNHANDLED ERROR!