Chemical Composition Base Element Fe (Iron) C (Carbon) 0.7 to 1.4 % Fe (Iron) 98.1 to 98.8 % (estimate) Mn (Manganese) 0.25 % Si (Silicon) 0.25 % Balance Fe (Iron) Composition Note Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one. Mechanical Properties Rockwell Hardness C scale 56 to 60 Other Information Material Class Ferrous Alloy Country USA Description Typical heat treated hardness: 56-60 HRC; For threading dies, shear knives, chisels, drills, punches, trimming and blanking dies, cold heading dies, pneumatic tools. Water hardening. AISI W-1. Designation POMPTON Specification Type Manufacturer's Specification Specification Status Obsolete Source Woldman's Engineering Alloys 9th ed. J. Frick Editor, ASM International 2000 Available forms Wrought Similar Alloys Click here to find similar alloys Links Organizations AL Tech Specialty Steel Corp.
No warranty is given for the accuracy of these data Copyright © 2024 ASM International®

Chemical Composition

Base Element

Fe (Iron)

C (Carbon)

0.7 to 1.4

Fe (Iron)

98.1 to 98.8

% (estimate)

Mn (Manganese)

0.25

Si (Silicon)

0.25

Balance

Fe (Iron)

Composition Note

Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one.

Mechanical Properties

Rockwell Hardness C scale

56 to 60

Other Information

Material Class

Ferrous Alloy

Country

USA

Description

Typical heat treated hardness: 56-60 HRC; For threading dies, shear knives, chisels, drills, punches, trimming and blanking dies, cold heading dies, pneumatic tools. Water hardening. AISI W-1.

Designation

POMPTON

Specification Type

Manufacturer's Specification

Specification Status

Obsolete

Source

Woldman's Engineering Alloys 9th ed. J. Frick Editor, ASM International 2000

Available forms

Wrought

Similar Alloys

Click here to find similar alloys

Links

Organizations

AL Tech Specialty Steel Corp.

UNHANDLED ERROR!