1) Cast analysis.
2) Since, Si has an adverse effect on machinability, it is not intentionally added to specified limits, but if the formation of special oxides is guaranteed, a Si content of 0.10-0.40 % may be agreed.
3) At the time of enquiry and order, it may be agreed that either a grade with 0.06-0.11 % P or a grade with  0.05 % P shall be delivered.
4) Fe is listed as a Base element for this material, but its % value is not listed in the specification. The value shown is a calculated one.

Mechanical Properties

Tabular Data

Hide table

Save as CSV Copy To Clipboard

Dimensions	Yield Strength (lbf/ft^2)	Ultimate Tensile Strength (lbf/ft^2)	Elongation (% strain)
Thickness, ≥ 5 to ≤ 10 mm	≥ 9.19e6	1.07e7 to 1.69e7	≥ 6
Thickness, > 10 to ≤ 16 mm	≥ 8.56e6	1.02e7 to 1.59e7	≥ 7
Thickness, > 16 to ≤ 40 mm	≥ 7.83e6	9.61e6 to 1.48e7	≥ 8
Thickness, > 40 to ≤ 63 mm	≥ 6.37e6	8.35e6 to 1.36e7	≥ 9
Thickness, > 63 to ≤ 100 mm	≥ 5.12e6	7.52e6 to 1.32e7	≥ 9