Chemical Composition Base Element Fe (Iron) C (Carbon) 0.1 % (maximum) Cu (Copper) 0.2 % (maximum) Fe (Iron) 96.7 to 100 % (estimate) Mn (Manganese) 2 % (maximum) Ni (Nickel) 0.2 % (maximum) P (Phosphorus) 0.03 % (maximum) S (Sulfur) 0.03 % (maximum) Si (Silicon) 0.7 % (maximum) Composition Note Fe is listed as a Base element for this material, but its % value is not listed in the specification. The value shown is a calculated one. Mechanical Properties Yield Strength 5.22e6 lbf/ft^2 (minimum) Ultimate Tensile Strength 8.35e6 lbf/ft^2 (minimum) Elongation 26 % strain (minimum) Other Information Material Class Ferrous Alloy Alloy Family Carbon Steel Alloy Group Low-carbon steel and HSLA steel Alloy Sub-Group 1008/ 1009 Country International Standards Body ISO (International) Description Killed, cold-reduced bake hardening steel sheet of high tensile strength, low yield point with improved formability; EL gauge length=80 mm. Designation DP250 Specification Type Standard Specification ISO 14590 Specification Year 2005 Specification Status Active Specification Status Notes active 2005 Source Worldwide Guide to Equivalent Irons and Steels, 5th ed. ASM International 2006 Available forms Wrought Similar Alloys Click here to find similar alloys Links Organizations International Organization for Standardization (ISO)
No warranty is given for the accuracy of these data Copyright © 2024 ASM International®

Chemical Composition