Chemical Composition Base Element Fe (Iron) Cr (Chromium) 0.15 % (maximum) Cu (Copper) 0.2 % (maximum) Fe (Iron) 99.3 to 100 % (estimate) Mo (Molybdenum) 0.06 % (maximum) Ni (Nickel) 0.2 % (maximum) P (Phosphorus) 0.1 % (maximum) S (Sulfur) 0.015 % (maximum) Composition Note Fe is listed as a Base element for this material, but its % value is not listed in the specification. The value shown is a calculated one. Mechanical Properties Yield Strength 6.27e6 lbf/ft^2 Ultimate Tensile Strength 8.56e6 lbf/ft^2 Elongation 35 % strain Other Information Material Class Ferrous Alloy Alloy Family Carbon Steel Alloy Group Low-carbon steel and HSLA steel Alloy Sub-Group Weldable casting Country USA Standards Body SAE (USA) Description Continuously cast high strength sheet for forming, welding, assembling and painting; dent resistant, bake-hardenable, cold-reduced; properties as received. Designation 280 B Specification Type Standard Specification SAE J2340 Specification Year 1999 Specification Status Active Specification Status Notes active 1999 Source Worldwide Guide to Equivalent Irons and Steels, 5th ed. ASM International 2006 Similar Alloys Click here to find similar alloys Links Organizations SAE, International (SAE) (SAE J)
No warranty is given for the accuracy of these data Copyright © 2024 ASM International®

Chemical Composition

Base Element

Fe (Iron)

Cr (Chromium)

0.15

% (maximum)

Cu (Copper)

0.2

% (maximum)

Fe (Iron)

99.3 to 100

% (estimate)

Mo (Molybdenum)

0.06

% (maximum)

Ni (Nickel)

0.2

% (maximum)

P (Phosphorus)

0.1

% (maximum)

S (Sulfur)

0.015

% (maximum)

Composition Note

Fe is listed as a Base element for this material, but its % value is not listed in the specification. The value shown is a calculated one.

Mechanical Properties

Yield Strength

6.27e6

lbf/ft^2

Ultimate Tensile Strength

8.56e6

lbf/ft^2

Elongation

% strain

Other Information

Material Class

Ferrous Alloy

Alloy Family

Carbon Steel

Alloy Group

Low-carbon steel and HSLA steel

Alloy Sub-Group

Weldable casting

Country

USA

Standards Body

SAE (USA)

Description

Continuously cast high strength sheet for forming, welding, assembling and painting; dent resistant, bake-hardenable, cold-reduced; properties as received.