Range attributes C (Carbon) 1 % Cr (Chromium) 5 % Fe (Iron) 92.7 % (estimate) Mo (Molybdenum) 1 % Rockwell Hardness C scale 58 to 62 V (Vanadium) 0.3 % Discrete attributes ~Checking Status Not verified - Original build Date Last Checked Thursday, October 17, 2013 Available forms Wrought Balance Fe (Iron) Base Element Fe (Iron) Country USA Material Class Ferrous Alloy Source Woldman's Engineering Alloys 9th ed. J. Frick Editor, ASM International 2000 Specification Status Obsolete Specification Type Manufacturer's Specification Short text attributes Composition Note_old Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one. Country* USA Description_old Usually at 58-62 HRC; General purpose air hardening cold work die steel; good wear resistance and toughness. For blanking and forming dies, punches, rolls and trim dies. AISI A2. Designation SAGAMORE Long text attributes Composition Note Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one. Description Usually at 58-62 HRC; General purpose air hardening cold work die steel; good wear resistance and toughness. For blanking and forming dies, punches, rolls and trim dies. AISI A2. Hyperlink attributes Similar Alloys Click here to find similar alloys Integer attributes ID 60649 Source ID 231893 Further Information Organizations AL Tech Specialty Steel Corp.
No warranty is given for the accuracy of these data Copyright © 2024 ASM International®

Range attributes

C (Carbon)

Cr (Chromium)

Fe (Iron)

92.7

% (estimate)

Mo (Molybdenum)

Rockwell Hardness C scale

58 to 62

V (Vanadium)

0.3

Discrete attributes

~Checking Status

Not verified - Original build

Available forms

Wrought

Balance

Fe (Iron)

Base Element

Fe (Iron)

Country

USA

Material Class

Ferrous Alloy

Source

Woldman's Engineering Alloys 9th ed. J. Frick Editor, ASM International 2000

Specification Status

Obsolete

Specification Type

Manufacturer's Specification

Short text attributes

Composition Note_old

Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one.

Country*

USA

Description_old

Usually at 58-62 HRC; General purpose air hardening cold work die steel; good wear resistance and toughness. For blanking and forming dies, punches, rolls and trim dies. AISI A2.

Designation

SAGAMORE

Long text attributes

Composition Note

Fe is listed as a Balance element for this material, but its % value is not listed in the specification. The value shown is a calculated one.

Description

Usually at 58-62 HRC; General purpose air hardening cold work die steel; good wear resistance and toughness. For blanking and forming dies, punches, rolls and trim dies. AISI A2.

Hyperlink attributes

Similar Alloys

Click here to find similar alloys

Integer attributes

60649

Source ID

231893

Further Information

Organizations

AL Tech Specialty Steel Corp.

UNHANDLED ERROR!